|
|
Post by class37 on May 22, 2016 4:38:03 GMT -5
Can the SC1 outputs be customised to give the following.
2 simple ground signals one connected to A/B and the other C/D with the remaining 4 outputs EFGH all individually switched.
Thanks in advance
Stan
|
|
|
|
Post by Paul Harman on May 28, 2016 17:17:35 GMT -5
Hi Stan
This is unfortunately not a configuration option. The closest options available are:-
1. CV38=0 which will allow ground signals on A/B and C/D with E and G as individual outputs.
2. CV38=8 which has all the outputs individually controlled. Inverting B and D with CV35=80 and operating A and B together or C and D together should do what you require.
3. CV38=129 is another option which will allow A and B (or C and D) to be controlled by extended accessory packets with aspect 0 = red/on and aspect 2 = Lunar/off. E and F (or G and H) can then be controlled with extended accessory packets aspect 8 = both off, 0 = E on, 2 = F on, 1 = both on.
I hope that one of those will help you.
Paul
|
|
|
|
Post by class37 on May 30, 2016 11:15:39 GMT -5
Hi Paul
Thank you for your reply.
First suggestion will do what I need
Thanks
Stan.
|
|
