4 Feathers on a 3 aspect

[marcus]

Hi,

I am wondering what would be the best way to hook up a 3 aspect r/y/g colour light with 4 feathers 1/4/5&6 - Signal 114 on this diagram



I was hoping to use one unit. Figure 6 in the manual show the unit describes E as a common light, can this be used to drive the 4th feather, or can the double yellow aspect do the same?

Many thanks

Marcus

[Paul Harman]

Hi Marcus

Probably the only option available is to use the CV38=8 option. If you are using JMRI you will be able to use the mast types where each lamp has it's own turnout address, and use the pivot lamp output for the fourth feather.