No Aspects displayed with CV38 set to 139

[Paul Harman]

Hi Steve

I have just set up a test here with a sprog, a Lenz, and a decoder with v0.44 firmware and it all works fine. The CV37 value should be 136 (I got that one wrong - sorry).

My test is with CV38=138 with the address set to 55. The first mast works on address 55 and the second on 56. By default with JMRI the feathers are offset by four and they work on turnout addresses 51 and 52 respecively. Aspect number for the 'Off' indication is aspect 4.

I am not sure what I can suggest for further testing.

[spbeck]

Thanks Paul, i've settled on a non extended config that works.

I have another question though

I've been experimenting with lighting effects and have 1 board with cv38 = 8.

Ive been trying the xenon strobe effects but they don't deem to work. Im assuming the strobe pulses are too short to energise the LEDs ?

Other effects ok.

Steve

[Paul Harman]

The xenon strobes should work, I will look into it.