|
Post by frodo57 on Jul 16, 2017 3:21:40 GMT -5
Hi , I have 3 SC1's that will control Eleven 2 aspect signals ( Red -Green) , I have used a Sprog and decoder pro to give the 1st SC1 the address number 50 , does this mean that the 4 outputs on the SC1 will now automatically have the addresses 51 -55 ? and if I give the 2nd SC1 the Address 60 will it's outputs be automatically numbered 61-65 and the same thing if I make the third SC1 number 70 ?.
|
|
|
Post by Paul Harman on Jul 17, 2017 8:45:19 GMT -5
Hi Frodo
If you give a SC1 the address 50, the four 2-aspect signals will be addresed as 50, 51, 52 and 53.
In most cases the decoder address will be the address of the first signal, and all subsequent signals will have consecutive addresses.
|
|
|
Post by frodo57 on Jul 17, 2017 15:04:01 GMT -5
Thank you Paul that was a great help , I reckon I should be ok now .
|
|