|
Post by swanage on Jan 22, 2018 6:04:09 GMT -5
I'm using JMRI ver 4.6 on a windows 7 pro machine with NCE PowerPro. I want to use 2 aspect signals on the layout; the simple signals logic works fine on screen as does the block detection. I can operate the SC1 using the NCE handset but I cannot make the physical signals work by throwing the points. I set up the SC1 using the automatic method on page 17. (Address 50-53). I would be very grateful for your advice. I'm modelling North American railroads.
|
|
|
Post by Paul Harman on Jun 14, 2020 17:17:57 GMT -5
You will just need to configure the signal mast to use a head that has the same turnout address that you use when using the NCE handset.
|
|